Finding Gateway Device Information

When you log into your gateway, you will be greeted by the status page. Here, you will find all the device information for you gateway.

Under "- Device" you will find the information about your device specifically.

  • Firmware version – The gateway’s current firmware level. This is the software that provides the gateway’s functionality.
  • Hardware version – Hardware version of the gateway.
  • Gateway name – The gateway’s name (hostname) is set during the first boot wizard. You can change the gateway name in "System"> "- General". This is the name your gateway will appear as on your network.
  • Serial number – The unique identifying number assigned to your gateway.
  • Uptime – The amount of time your gateway has been operational. This will restart every time you reboot the gateway.
  • Load – Gateway’s current (CPU) usage.

Under ‘Network’ you find all the information regarding your network connection.

  • Adaptor – The gateway’s current configuration of primary and failover network adaptors. You can change the network adaptor settings in "Network Configuration" > " - Adaptors & Failovers".
  • Ethernet MAC address – The physical address of the gateway’s ethernet adaptor.
  • WiFi MAC address – The physical address of the gateway’s WiFi adaptor.
  • Ethernet IP address – The IP address assigned to the gateway by the Ethernet network will be shown if Ethernet connection is enabled.
  • WiFi IP address – The IP address assigned to the gateway by the WiFi network will be shown if WiFi connection is enabled.
  • LTE IP address – The IP address assigned to the gateway by the LTE network will be shown if LTE connection is enabled.

Under ‘Connections’ you will find all the information regarding your device connections.

  • MQTT – The current status of the MQTT connection.
  • Azure IoT Hub – The current status of the Azure IoT Hub connection.
  • AWS IoT – The current status of the AWS IoT connection.
  • Google Sheets - The current status of the Google Sheets connection.

Under ‘Applications’ you will find all the information regarding your device applications.

  • Node-RED – The current status of the Node-RED application.

Under ‘EnOcean’ you will find all the information on your device regarding EnOcean.

  • Gateway base ID – The gateway’s EnOcean base ID.
  • Gateway device ID – The gateway’s EnOcean device ID.
  • Devices – Number of EnOcean devices currently associated with the gateway. You can add a new device in " EnOcean "> "- Add Device".